142
6.3.2 Setting Add Address Fields
"Set Address Fields" enables you to select one of the 22 fields to be shown
when you enter contact information. There are 22 fields in a record, but you
may not want to enter information in every one of the 22 fields. You can use
"Set Address Fields" to select only the fields that you need.
To use this function, press “Alt” to bring up the menu, then select "Set
Address Field", or press "o" then press "Enter". Or, you can press “Ctrl-o”
from the "Add Address" dialog.
On the right side of each field name, "used" or "unused" is displayed. The
default value is set to "used". To toggle the value, press "Space".
After setting all the fields you want to change, move to the "Confirm" button
or the "Cancel" button by pressing “Tab” or "shift-tab", then press "Enter" to
save or cancel the changes. You can also cancel the changes by pressing
"Esc" or "Alt-F4".
6.3.3 Using "Search Address" in "Add address"
In "Add Address", use the "Search Address" function to jump to another
record. To use the "Search Address" function, press “Alt” to open the menu.
Next move to "Search Address", then press "Enter", or press "s". You can
also press “Ctrl-s” from the "Add Address" dialog.
If you have entered information in a record before executing "Search
Address", you are asked, "Save changes? Yes/No". After you make your
choice, the "Search Address" dialog is displayed.
6.4 Searching For an Address
6.4.1 Using "search address"
The "Search Address" dialog enables you to search for information stored in
the "Address Manager". If you execute the "Address Manager" from the
"program" menu, the "Search Address" dialog is opened automatically. To
