410
For more information on using the Braille Sense U2 QWERTY as a Braille
display, see section 13.2.5 on using the Bluetooth serial service. You can
also download USB drivers and installation instructions for various screen
readers under the "Resource Center" section of our website: www.hims-
inc.com.
17.10 Setup Internet
The "Setup internet" function is used to configure your Braille Sense U2
QWERTY to use various connection types to access the Internet. The "Setup
internet" utility contains the following connection options: "LAN", "Wireless
LAN", "Modem", "ADSL", and "Bluetooth DUN". You can move among the
five items by pressing “down arrow button” or “up arrow button”. The "LAN"
setup should be used if you are connecting to the Internet via a Ethernet
network or router. The "Modem" setup should be used if you are connecting
to the Internet via a dial-up modem. The "ADSL" setup should be used if you
are connecting to the Internet via a DSL modem. To connect to the Internet
via a wireless network, use the "Wireless LAN" option.
To activate "Setup internet", press "Enter" on "Setup internet" in the "Utilities"
menu, or press "I" from the menu.
Or, if the PC on which the Active Sync program is installed is connected to
the Internet, and the Braille Sense U2 QWERTY is connected to that PC,
you can also connect the Braille Sense U2 QWERTY to the Internet via that
connection.
The various connection types are explained in greater detail in the following
sections.
17.10.1 LAN Setup
Before attempting to set up a LAN connection, connect one end of a LAN
cable to the Braille Sense U2 QWERTY and the other to a router or direct
LAN connection to the Internet. ALSO, be sure the Ethernet port is turned on
