316
Now that you have set up Window-Eyes, you need to return to the Braille
Sense U2 QWERTY to finish the setup.
13.2.5.4 Setting up the Braille Sense U2 QWERTY
1) Press "Win key" to get to the Program menu.
2) Press “up arrow button” or “down arrow button” to get to the Utilities menu,
or just press the letter u".
3) Press "Enter".
4) Press “up arrow button” or “down arrow button” to get to Terminal for
screen reader, and press" enter".
5) Press “up arrow button” or “down arrow button” to get to Bluetooth Serial
Port, and press "Enter".
The Braille Sense U2 QWERTY should be connected as a Bluetooth Braille
display. To exit Terminal Mode, press "Alt-x". Please note that "Win key" on
the Braille Sense U2 QWERTY still takes you to the Program menu as you
can continue to multi-task while in Terminal Mode. This enables you to use
the applications on the Braille Sense U2 QWERTY at the same time, and be
able to switch back to using the Braille Sense U2 QWERTY as a Bluetooth
Braille display.
13.2.5.5 Using Braille Sense U2 QWERTY as a Braille display
with iPhone, iPad, or iPod
Use the following instructions to connect the Braille Sense U2 QWERTY as a
Bluetooth Braille display with your iPhone, iPad, or iPod. Note: You must be
running IOS 4.2 or higher on your i-device in order to use the Braille Sense
as a Bluetooth Braille display with VoiceOver. These instructions refer to the
iPhone, however, they apply to all compatible i-devices: iPhone 3Gs and
higher, iPad, and iPod Touch 3G and later.
On the Braille Sense U2 QWERTY:
1) Turn Bluetooth on using "F9".
