251
Pressing "Enter" on the "add" button opens the "add preset" dialog explained
above. If you wish to change the label of a previously added preset, move to
the desired preset item in the preset list by pressing “up arrow button” or
“down arrow button”. Press “Tab” to move to the "Modify" button and press
"Enter". The "Modify" dialog is opened. The structure of the "Modify dialog" is
the same as that of the "Add" dialog. The only difference is that the preset
label and frequency are both filled in for the "Modify" dialog.
If you want to delete a preset from the preset list, select the desired preset
and move to the "Delete" button by pressing “Tab” and press "Enter".
To exit the Preset Manager" dialog navigates to the "Close" button and press
"Enter" or press "Esc".
You can also use the media buttons on the front panel to add and move
among presets.
To use the media buttons, the Media Mode switch should be set to "FM
radio".
Press the "record" button for more than 2 seconds, to open the "add preset"
dialog. To move to the previous preset in the Preset List, press the "Back"
button for more than 2 seconds. Pressing the "Forward" button for more than
2 seconds moves to the next preset in the preset list.
Pressing the "stop" button for more than 2 seconds deletes the selected
preset.
10.4 Recording from the FM Radio
To record the audio of the radio station to which you are currently listening,
press “Alt” To open the menu, navigate to "Record (r)" and press "Enter". Or
use the hot key, "Ctrl-r". The "record" dialog is opened and the Braille Sense
U2 QWERTY begins recording.
The record dialog consists of the following controls:
1. "Record status" status bar
2. "Pause/Continue" button
3. "Stop" button
4. "Cancel" button
