107
the new file name to overwrite what is currently in the edit box. You cannot
use the following characters in a file or folder name. “|, \, <, >, ?, :, *”
To change the file format, navigate to "Type". Move to your desired file
format by pressing “up arrow button” or “down arrow button”.
To save a file with a file name that is in the file list, move to the "file list" by
pressing "shift-tab".
5.1.5 Close Current Document
The "Close Current Document" command allows you to close the currently
focused document without closing the Word Processor. You can access the
"Close Current Document" command by pressing “Alt”. Then, press "Enter"
on the "File" menu. Use the up and down arrows (“up arrow button” and
“down arrow button”) to navigate to "Close Current Document", and press
"Enter". Or, you can press "q" in the "File" menu. You can also access this
function by pressing "Ctrl-F4" while editing a document. Please note that this
function is not available if you only have one document open. You must have
at least two or more documents open to execute the "Close Current
Document" command.
5.1.6 Print
The "Print" command is used to print or emboss the current document. To
execute this command, press “Alt”, and press "Enter" on the "File" menu.
Then, move to "Print" by pressing “down arrow button”, and press "Enter", or
just press "p”. While editing a document, the hot key for printing is "Ctrl-p".
There are two lower level dialogs for the "Print" option. One is for printing
with an ink printer, and the other is for embossing in Braille. Remember that
you can move between the menu items by using “up arrow button” or “down
arrow button”.
1. Embossing in Braille
Open the document that you want to emboss. Press “Alt” to activate the
menu. Locate "print" in the "File" menu and select "Embosser", or press "b".
