415
"Add" is a dialog for creating a modem connection configuration. It contains
"connection settings list", a "Confirm" button, and a "Cancel" button. You
can move among these by pressing “Tab” or "shift-tab". The "connection
settings list" contains "Connect name", "Connect number", "ID", "Password",
and "Modem speed". In the "Connect name" edit box, type the host name or
something that clearly identifies this connection to you. In the "Connect
number" edit box, type the number of the host in computer Braille. Note: you
can type numbers and commas only. If the connection requires an ID and
password, enter these in the appropriate edit boxes using computer Braille. If
the connection does not require an ID and password, leave these blank. In
the "Modem speed", combo box, select one from the list by pressing
"Backspace" or "Space". When you have entered all of the necessary
information, press "Enter" to save the connection configuration. If you do not
want to save, you can cancel by moving to "Cancel" using “Tab”, and press
"Enter" on it.
"Modify" is used to change the information in a given connection
configuration. You can do this by moving to the connection you want to
modify and pressing "Enter". You can also press “Tab” to navigate to
"Modify" and press "Enter". Or, you can press "Enter-m (1-3-4)" on the
"Connect name" in the "connect list". "Modify" contains the same items as
the "Add" dialog, and you navigate and set the values in the same way.
To delete an item, move to the connection you want to delete, and press
"Enter" on the "delete" button. Or, you can delete an item by pressing "Del"
on the connection you wish to delete.
To exit the "Modem setup", press "Alt-F4", or press “Tab” to move to the
"Close" button and press "Enter".
17.10.4 ADSL Setup
To connect the Braille Sense U2 QWERTY to the Internet via a DSL
connection, use the ADSL connection option in "Set up Internet". Before
configuring the connection, connect one end of a LAN cable to the Braille
