Freescale Semiconductor MC9S12ZVM series, Reference Manual

Page: 744 / 825

Appendix A MCU Electrical Specifications
MC9S12ZVM Family Reference Manual Rev. 1.3
744 Freescale Semiconductor
A.1.4 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only. A functional operation outside these ranges is not
guaranteed. Stress beyond these limits may affect the reliability or cause permanent damage of the device.
This device contains circuitry protecting against damage due to high static voltage or electrical fields;
however, it is advised that normal precautions be taken to avoid application of any voltages higher than
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level.
Table A-2. Absolute Maximum Ratings
Num Rating Symbol Min Max Unit
1 Voltage regulator and LINPHY supply voltage V
SUP
-0.3 42 V
2 DC voltage on LIN V
LIN
-32 42 V
3 Core logic supply voltage V
DD
-0.3 2.16 V
4 Flash supply voltage V
DDF
-0.3 3.6 V
5 FET-Predriver High-Side Drain V
HD
-0.3 42 V
6 FET-Predriver Bootstrap Capacitor Connection V
VBS
-0.3 42 V
7 FET-Predriver High-Side Gate
(1)
V
HG
-5 42 V
8 FET-Predriver High-Side Source
(1)
V
HS
-5 42 V
9 Generated FET-Predriver Low-Side Supply V
VLS_OUT
-0.3 42 V
10 FET-Predriver Low-Side Supply Inputs V
VLS
-0.3 42 V
11 FET-Predriver Low-Side Gate
(1)
V
LG
-5 42 V
12 FET-Predriver Low-Side Source
(1)
V
LS
-5 42 V
13 FET-Predriver Charge Pump Output V
CP
-0.3 42 V
14 FET-Predriver Charge Pump Input V
VCP
-0.3 42 V
15 FET-Predriver Boost Converter Connection V
BST
-0.3 42 V
16 FET-Predriver Boost Converter Ground V
VSSB
-0.3 0.3 V
17 Voltage Regulator Ballast Connection V
BCTL
-0.3 42 V
18 Supplies VDDA, VDDC, VDDX V
VDDACX
-0.3 6 V
19 Base connection of bipolar for CANPHY supply V
BCTLC
-0.3 42 V
20 Voltage difference V
DDX
to V
DDA
(2)
∆
VDDX
–0.3 0.3 V
21 Voltage difference V
SSX
to V
SSA
∆
VSSX
–0.3 0.3 V
22 Digital I/O input voltage V
IN
–0.3 6.0 V
23 EXTAL, XTAL
(3)
V
ILV
–0.3 2.16 V
24 TEST input V
TEST
–0.3 10.0 V
25 Instantaneous current. Single pin limit for all digital I/O pins
(4)
I
D
–25 +25 mA
26 Instantaneous maximum current on EVDD1 I
EVDD1
-80 +25 mA
27 Instantaneous maximum current. Single pin limit for EXTAL, XTAL I
DL
–25 +25 mA