8
8
8-164
8-164
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
MEAP-SSL
HTTPS port setting of MEAP
Lv.2 Details
To set the port of HTTPS server in the case of using SSL with HTTP of
MEAP.
Use case
When setting HTTPS port for MEAP
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 65535
Default value
8443
LPD-PORT
Setting of LPD port number
Lv.2 Details
To set the LPD port number.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 65535
Default value
515
WUEV-SW
Setting of sleep notification execution
Lv.2 Details
To set whether to notify the sleep mode to the application (imageWARE,
etc) on the network when shifting to/recovering from the sleep mode.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: Notified, 1: Not notified
Default value
0
WUEV-INT
Setting of sleep notification interval
Lv.2 Details
To set the interval of sleep notification.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range
60 to 65535
Unit
sec
Default value
600
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
WUEV-POT
Port number setting for sleep notice
Lv.2 Details
To set port number of the PC to notify the sleep mode.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range
1 to 65535
Default value
11427
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
COPIER > OPTION > NETWORK
WUEV-RTR
Setting of sleep notification range
Lv.2 Details
To set the number of available routers to the target for sleep
notification.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This is active when COPIER> OPTION> NETWORK> WUEV-SW is
set to 0: Notified.
Display/adj/set range
0 to 254
Default value
3
Related service mode COPIER> OPTION> NETWORK> WUEV-SW
WUEN-LIV
Recovery time setting after sleep notice
Lv.2 Details
To set the time from the sleep start from network without job
assignment until the mode is shifted to the sleep mode.
Use case
When setting the startup time after sleep notification
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 600
Unit
sec
Default value
15
IFX-CHIG
Set operation by IFAX recv e-mail text
Lv.1 Details
To set the number of characters for the IFAX received e-mail text, so
that the e-mail is not printed/forwarded when the characters in the text
is less than the number of specified characters.
This machine can output blank paper because some senders send
e-mail text consisting of linefeed codes only. In such case, specify 2
(number of characters) so that there will be no output of blank paper.
In the case of specifying any number other than 0, header/footer is
printed/forwarded in 1 sheet only if the e-mail (body) text is less than
the specified value while no TIFF file is attached.
As the value is incremented by 1, the number of target characters in
e-mail body text is increased by 1 character.
Use case
When reducing printouts of blank paper due to e-mail received by
IFAX
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to get approval from the user by telling that there will be no
print of e-mail (body) text if the number of characters is less than the
specified value.
Display/adj/set range
0 to 999
0: E-mail text is not ignored.
Unit
char
Default value
0