9
9
9-32
9-32
Installation > Installation Procedure > Adjusting Image Position > Margin Adjustment (1st side; Mechanical Adjsutment)
Installation > Installation Procedure > Adjusting Image Position > Margin Adjustment (1st side; Mechanical Adjsutment)
5) Move the adjusting plates back and forth by referring the scale checked in the step 3). As
moving the adjusting plate toward the rear by 1 scale, the left edge margin becomes 1mm
smaller.
NOTE:
When moving the scale, be sure that the amount of the value to be moved are the same
for the 2 points.
6) Tighten the fixing screw.
7) Return the cassette to its original position.]
F-9-66
NOTE:
When the cassette positions are uneven due to the mechanical adjustment, adjust them
by loosening the screw at left side.
8) Make copies using the Cassette 1 and 2, and check that the left edge margin is 2.5+/-
1.5mm.
F-9-67