manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 583 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 583

6

6

6-45

6-45

Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software

Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software

 

●

Downloading System Software

Copy the system software from SST to the USB memory storage device storage device.
Right after download from the USB memory storage device storage device, the system 
software is stored in the temporary memory space in HDD.
The system software is written in the system memory area, Boot area and Flash ROM upon 
the machine restarted.
When the writing process is successfully completed, the machine is automatically restarted 
with the new version of the system software.

Task in the office

Tasks in the customer site

FLASH

     ROM

HDD

System

Software

System

Software

<<<<< download shell >>>>>

[ SYSTEM JPja-m ] - - - -

[ SYSTEM ZZ ] - - - - - - -

[ SYSTEM JPja-w ] - - - -

[ SYSTEM ZZ ] - - - - - - -

[ FONT F ] - - - - - - - - - -

[ FONT G ] - - - - - - - - - -

+++ Switch OFF the power then ON. +++

Upgrading complete

Upgrading complete

Upgrading complete

Upgrading complete

Upgrading complete

Upgrading complete

- - - Download Mode - - -

[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - -

[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - -

[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - -

[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - -

[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - -

[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - -

[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - -

[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - -

Complete

Complete

Complete

Complete

Complete

Complete

Complete

Complete

HDD

System

Software

Temporary

memory space

System

memory area

主電源スイッチ

OFF/ON

Start with the new version.

2)

主電源スイッチ

OFF/ON

4)

5)

Download the system software

1)

The system software is written

3)

Automatically restarted

Automatically restarted

Temporary

memory space

System

Software

USB memory

storage device

Copying the system software

F-6-65

 

■

Copying System Software

 

●

System CD to SST

Copy the system software stored in the system CD to SST.

NOTE:

The system software is compressed if the file size exceeds the CD memory capacity.

If the above is the case, decompress the file before copying it to SST.

Preparation
Requirements:
•  PC with SST Ver. 4.41 or later installed
•  The system CD for this machine

Steps to copy the system software
1) Start the PC.
2) Set the system CD to the PC.
3) Start SST.
4) Click “Register Firmware” button.

F-6-66

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments