manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 643 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 643

6

6

6-105

6-105

Troubleshooting > Version upgrade > Error Code > Error Codes When Using the UGW-linked Function

Troubleshooting > Version upgrade > Error Code > Error Codes When Using the UGW-linked Function

 

■

Error Codes When Using the UGW-linked Function

Codes displayed as eRDS errors when the UGW-linked function is used

Error Code (hex number)

Description

Remedy

Cause of error

The first 

digit Error 

field

The second 

digit 

Operator

The 3rd - 4th 

digits Method 

category

The 5th digit 

Category 

code

The 6 - 8th digits 

Description 

code

CDS 

delivery 

server

UP

DATER

CDS file 

server

Network

8

Error

x

x

x

0

Unclassified

000

An unexpected error occurred in the device.

Restart the device, and perform the operation again.

When this problem recurs, the firmware of the device 

needs to be reinstalled (upgraded).

-

Yes

-

-

002

A time-out error occurred due to no response from 

Updater within the specified time (3 seconds).

Obtain the sublog, and contact the support department 

of the sales company.

-

Yes

-

-

101

Processing in the device (event processing) 

failed. Restart the device, and perform the 

operation again.

Restart the device, and perform the operation again.

When this problem recurs, the firmware of the device 

needs to be reinstalled (upgraded).

-

Yes

-

-

303

Queue could not be sent due to failure of 

processing in the device (event processing).

Restart the device, and perform the operation again.

When this problem recurs, the firmware of the device 

needs to be reinstalled (upgraded).

-

Yes

-

-

304

An error occurred in control of synchronization or 

interruption processing between processes being 

handled in parallel.

Wait for a while, and perform a communication test 

again.

-

Yes

-

-

706

Communication with Updater failed.

Restart the device, and perform the operation again 

after checking that Updater has been started.

When this problem recurs, obtain the sublog, and 

contact the support department of the sales company.

-

Yes

-

-

707

-

Yes

-

-

708

-

Yes

-

-

709

At the time of firmware update, the Tracking 

ID ordered by UGW and the one to which the 

Updater responded did not match.

Obtain the sublog, and contact the support department 

of the sales company.

-

Yes

-

-

T-6-21

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments