8
8
8-74
8-74
Service Mode > COPIER > ADJUST > CCD
Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > CCD
SH-TRGT
Shading tgt VL(B&W)[Copyboard](D-Reader)
Lv.1 Details
To set the B&W shading target value in copyboard reading mode.
Use case
- When replacing the Reader Controller PCB/clearing RAM data
- When replacing the Scanner Unit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
1 to 2047
Default value
1126
100-RG
Img Sensr RG color displace crrct VL:Frt
Lv.1 Details
To correct the color displacement (R and G lines) in vertical scanning
direction due to the Scanner Unit (paper front).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case
- When replacing the Scanner Unit
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-256 to 256
Unit
line
Default value
0
100-GB
Img Sensr GB color displace crrct VL:Frt
Lv.1 Details
To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper front).
When replacing the Reader Controller PCB/clearing RAM data, enter
the value of service label.
Use case
- When replacing the Scanner Unit
- When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-256 to 256
Unit
line
Default value
0
COPIER > ADJUST > CCD
DFTAR-R
Shading target value (R) [Front side]
Lv.1 Details
When replacing the Reader Controller PCB, enter the value of
service label.
When replacing the Copyboard Glass/Scanner Unit (paper front),
execute COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2 and
write the value which is automatically set in the service label.
Use case
- When replacing the Reader Controller PCB/clearing RAM data
- When replacing the Copyboard Glass/Scanner Unit (paper front)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 2047
Default value
1159
Related service mode
COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2
DFTAR-G
Shading target value (G) [Front side]
Lv.1 Details
When replacing the Reader Controller PCB, enter the value of
service label.
When replacing the Copyboard Glass/Scanner Unit (paper front),
execute COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2 and
write the value which is automatically set in the service label.
Use case
- When replacing the Reader Controller PCB/clearing RAM data
- When replacing the Copyboard Glass/Scanner Unit (paper front)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 2047
Default value
1189
Related service mode
COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2
DFTAR-B
Shading target value (B) [Front side]
Lv.1 Details
When replacing the Reader Controller PCB, enter the value of
service label. When replacing the Copyboard Glass/Scanner Unit
(paper front), execute COPIER> FUNCTION> CCD> DF-WLVL1,
DF-WLVL2 and write the value which is automatically set in the
service label.
Use case
- When replacing the Reader Controller PCB/clearing RAM data
- When replacing the Copyboard Glass/Scanner Unit (paper front)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 2047
Default value
1209
Related service mode
COPIER> FUNCTION> CCD> DF-WLVL1, DF-WLVL2