4
4
4-116
4-116
Parts Replacement and Cleaning > Image Formation System > Removing the ITB > Actions after Replacement
Parts Replacement and Cleaning > Image Formation System > Removing the ITB > Actions after Replacement
CAUTION:
Do not touch the surface of ITB Drive Roller, Secondary Transfer Inner Roller and
Primary Transfer Roller as it may cause the image failure.
CAUTION:
When replacing ITB with a new one, affix the label to the specific position after the ITB
Unit is installed.
When affixing the new label, be sure to remove the old label and replace with the new
one on the same position.
■
Actions after Replacement
1) Turn ON the power of the host machine.
2) When the machine is in standby condition, execute the following in user mode: (Settings/
Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust Gradation).