manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 240 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 240

2

2

2-202

2-202

Technology > MEAP > Option for exclusive individual measure > Error at starting up the MEAP application/Setting to hide JAM screen (level 2)

Technology > MEAP > Option for exclusive individual measure > Error at starting up the MEAP application/Setting to hide JAM screen (level 2)

3) Press [ANIM-SW] button.

4) Press either 0 (display warning screen) or 1 (hide warning screen) on control panel (the 

numerical value input in the field is displayed), and press [OK] button.

5) Check to see that it is reflected in setting field, and restart the device.

F-2-370

F-2-371

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments