manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 709 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 709

7

7

7-18

7-18

Error•Jam•Alarm > Error Code > Error Code Details

Error•Jam•Alarm > Error Code > Error Code Details

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 01B0

05

Title

Error in Y Toner Container Cam HP Sensor (PS5)

Description Unable to detect the change in the Toner Container Cam 

HP Sensor status (OFF -> ON) when closing the Toner 

Cap so that open and close status of the Toner Cap 

cannot be judged.

Remedy

Identify the cause of the error whether it is due to 

mechanical problem to open/close the Toner Cap or 

problem at the Toner Container Cam HP Sensor side.  

1. Check if the Toner Container Cam HP Sensor is soiled 

and the installation of the sensor.  

2. Rotate the Set-on Drive Shaft a little with the attached 

tool, and check the service mode (COPIER> I/O> DCON> 

P024 bit4) to see that the output value of the sensor is 

changed.  

Since it is difficult to check the screen while rotating it, 

repeat the operation to rotate it a little and check the 

screen until the value is changed.  

If it is normal, the output value of the sensor is changed 

when opening/closing the Toner Cap. Even if it is normal, 

be sure to perform step 4 and later steps.  

2-1. If there is an error in rotation of the Set-on Drive 

Shaft, check the drive system such as gears.  

If it is damaged, replace the Set-on Drive Unit and then 

perform step 4 and later steps.  

2-2. When the Set-on Drive Unit is not driven although 

the Set-on Drive Shaft rotates, check if it is driven by 

removing the Hopper Unit.  

If it is not driven, replace the Hopper Unit and then 

perform step 4 and later steps.  

2-3. When the output value of the sensor is not changed 

although the Set-on Drive Unit is driven, check the Sensor 

Harness (to see if the harness is caught, disconnected or 

physically removed).  

If there is no problem, replace the sensor. After checking 

the output value in step 2, perform step 4 and later steps.  

3. If the problem is not solved by replacing the foregoing 

parts, replace the Drum Driver PCB (UN4) and then 

perform step 4 and later steps.  

4. Clear the error in service mode (COPIER> 

FUNCTION> CLEAR> ERR), and then turn OFF and then 

ON the main power.  

5. Replace the toner (reinstall the removed Toner 

Container) at least once in user mode (Adjustment/

Maintenance> Replace Specified Toner), and check that 

toner replacement can be performed normally.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 01C0

05

Title

Error in Cover Sensor (PS13) in Y Toner Container 

Description Unable to detect opening of the Toner Container Inner 

Cover when removing the Toner Container.

Remedy

Identify the cause of the error whether it is due to link 

mechanism to open the Toner Container Inner Cover or 

problem at the Toner Container Inner Cover Sensor side.  

1. Perform the user mode (Adjustment/Maintenance> 

Replace Specified Toner) to check if the Toner Container 

Inner Cover opens normally (damage, slide of shaft area, 

etc.).  

2. Check if the Toner Container Inner Cover Sensor is 

soiled and the installation of the sensor.  

3. Check the service mode (COPIER> I/O> DCON> P024 

bit8) to see that the output value of the Toner Container 

Inner Cover Sensor is changed normally when opening/

closing the Toner Container Inner Cover.  

If it is normal, the value becomes 0 by rotating the Set-on 

Drive Shaft with the attached tool and opening the Toner 

Container Inner Cover. When closing the Toner Container 

Inner Cover by hand, it becomes 1.  

3-1. When the Toner Container Inner Cover is not opened 

although the Set-on Drive Shaft rotates, check the drive 

system from upstream (Set-on Drive Unit -> Hopper Unit 

-> Bottle Base Unit -> Toner Container Inner Cover Unit).  

If it is damaged, replace the damaged part and then 

perform step 5 and later steps.  

3-2. When the output value is not changed normally 

although the Toner Container Inner Cover can be opened/

closed, check the Sensor Harness (to see if the harness 

is caught, disconnected or physically removed, *including 

the Relay Connector).  

If there is no problem, replace the sensor. After checking 

the output value in step 3, perform step 5 and later steps.  

4. If the problem is not solved by replacing the foregoing 

part, replace the Drum Driver PCB (UN4) and then 

perform step 5 and later steps.  

5. Clear the error in service mode (COPIER> 

FUNCTION> CLEAR> ERR), and then turn OFF and then 

ON the main power.  

6. Replace the toner (reinstall the removed Toner 

Container) at least once in user mode (Adjustment/

Maintenance> Replace Specified Toner), and check that 

toner replacement can be performed normally.

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments