manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 258 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 258

2

2

2-220

2-220

Technology > Updater > Overview > Outline

Technology > Updater > Overview > Outline

c. Manual Download and Update (On-site Update via Service Mode)

If an imageRUNNER ADVANCE-series device has connection with the external network, 
a service technician can gain access to CDS via Service mode to download and update 
firmware. This allows service technicians to update the firmware as needed on the 
customer site even without PCs.

Firmware Upload

1) Manually execute

Updater.

2) Firmware distribution

Canon Inc.

CDS

Firmware

imageRUNNER

ADVANCE

Updater

Service

Technician

NOTE:

“External network” here means the network connecting the device to CDS via Internet.

d. As preparation for distribution, obtain firmware from the update CDS using 
iW EMC + Device Firmware Update Plug-in (DFU Plug-in) and register the firmware in the 
local CDS. In service mode of the host machine, make preparations to allow reception of 
firmware distributed from the local CDS. The firmware can be updated on the user's intranet 
by executing the task from Device Firmware Update Plug-in on iW EMC.

F-2-398

F-2-399

e. SST update
In the cases of devices other than imageRUNNER ADVANCE series and devices of 
imageRUNNER ADVANCE series that are not connected with external network, the foregoing 
three methods cannot be used to distribute firmware. Firmware released in the future will be 
distributed via CDS instead of distribution using a master CD. In the field, these firmware can 
be downloaded from CDS using a PC web browser.

Sales Company

Service Technician

3) Update via SST

The service technician downloads 
the firmware from CDS in advance 
and executes update using SST.

2) Download firmware to PC

1) Firmware Update

Canon Inc.

CDS

Firmware

Updater function available machine

Update function impossible machine

NOTE:

Users are able to gain firmware distribution in the following 4 methods by introducing 

CDS. See User Manual for detailed information.

Distribution Method

Download 

Commanded 

by

Update

Timing

Downloadable Firmware Versions

Previous Ver Current Ver Newer Ver

Manual download/

update via Local UI

Local UI

Auto

No

No

Yes *1

Manual

No

No

Yes *1

Manual download/

upload via Remote UI

Remote UI

Auto

No

No

Yes *1

Manual

No

No

Yes *1

Special download/

upload via Remote UI

Remote UI

-

Specific version only

(Obtain it separately)

Local CDS Download 

and Update

(iW EMC + DFU Plug-

in*3)

Firmware 

update 

process Plug-

in

Auto

No

No

Yes *1

*1: Only the latest version of Remote update-enabled version is downloadable. 

F-2-400

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments