manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 629 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 629

6

6

6-91

6-91

Troubleshooting > Version upgrade > Error Code > List of Error Codes Likely to Be Displayed

Troubleshooting > Version upgrade > Error Code > List of Error Codes Likely to Be Displayed

Error 

Code (hex 

number)

Description

Remedy

82095300 Codes other than the following "3xx" definition

Check that no problem is found in the proxy settings and network environment.

82095309 The proxy authentication method is not supported, or access to the CDS file server is not permitted.

Check the proxy authentication method being used, change the setting to use a 

supported proxy authentication, and then start the operation again.

Check that access to the following URL is permitted.

•  device.c-cdsknn.net (protocol: https)

•  cdsknn.net.edgesuite.net (protocol: http)

Error codes starting with "84": Service person
84001106 Another job existed immediately before the firmware update processing. 

Start the operation again after terminating the job of the device 

84005202 Failed to connect to the server

Check the network environment of the device (check for any problem in the DNS 

server), and start the operation again.

84005203 Failed to find the server

Check the network environment of the device (the proxy settings, etc.), and start the 

operation again.

84005204 An input/output error occurred during the connecting process to the server

Check that no problem is found in the two items displayed during the communication 

test. If any problem was found, check the network environment.

84005205 Failed to read a HTTP response

Check that no problem is found in the two items displayed during the communication 

test. If any problem was found, check the network environment.

84005206 Error in a HTTP response

Check the network environment.

84005300 Codes other than the following "3xx" definition

Check that no problem is found in the proxy settings and network environment.

84005304 Failed to receive the data

Check the network environment of the device, and start the operation again.

84005308 Invalid hash code of the download file

Check the network environment of the device, and start the operation again.

84005309 The proxy authentication method is not supported, or access to the CDS file server is not permitted.

Check the proxy authentication method being used, change the setting to use a 

supported proxy authentication, and then start the operation again.

Check that access to the following URL is permitted.

•  device.c-cdsknn.net (protocol: https)

•  cdsknn.net.edgesuite.net (protocol: http)

84095203 Failed to find the server

Check the network environment of the device (the proxy settings, etc.), and start the 

operation again.

84095204 An input/output error occurred during the connecting process to the server

Check that no problem is found in the two items displayed during the communication 

test. If any problem was found, check the network environment.

84095205 Failed to read a HTTP response

Check that no problem is found in the two items displayed during the communication 

test. If any problem was found, check the network environment.

84095206 Error in a HTTP response

Check the network environment.

84095300 Codes other than the following "3xx" definition

Check that no problem is found in the proxy settings and network environment.

84095309 The proxy authentication method is not supported, or access to the CDS file server is not permitted.

Check the proxy authentication method being used, change the setting to use a 

supported proxy authentication, and then start the operation again.

Check that access to the following URL is permitted.

•  device.c-cdsknn.net (protocol: https)

•  cdsknn.net.edgesuite.net (protocol: http)

Error codes starting with "85" :IT administrator (User)
85001106 Another job existed immediately before the firmware update processing. 

Start the operation again after terminating the job of the device 

85005203 Failed to find the server

Check the network environment of the device (the proxy settings, etc.), and start the 

operation again.

85005204 An input/output error occurred during the connecting process to the server

Check that no problem is found in the two items displayed during the communication 

test. If any problem was found, check the network environment.

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments