2
2
2-131
2-131
Technology > MEAP > Preparation for Using SMS > Settings on the Device Side
Technology > MEAP > Preparation for Using SMS > Settings on the Device Side
●
Network Port Settings
The default port of the HTTP server used for MEAP and MEAP applications to provide the
servlet function is 8000, and the HTTPS server's default port is 8443. In the case that these
ports have already used by the customer who is to introduce this application, the MEAP
application cannot use the HTTP (or HTTPS) server(s).
By changing the following ports to use, however, the MEAP application can be used as well
as the existing system.
1) Start [SERVICE MODE] in Level 2.
2) Press [COPIER] > [Option] > [NETWORK] buttons.
3) To set up the HTTP server port, select [ MEAP-PN ]. To set up the HTTPS server port,
select [MEAP-SSL ].
F-2-185
F-2-186
4) Press the port number to specify on the control panel (the numerical value input in the field
is displayed), and press [OK] button.
Note:
A port number can be any integer from 0 to 65535. To avoid port numbers that are
frequently used, do not use any integer from 0 to 1023.
Server
Setting value
Default value / Value after RAM clear
HTTP Server
1024 to 65535
8000
HTTPS Server
1024 to 65535
8443
Note:
If PS Print Server Unit is connected, do not specify port 8080.
If port 8080 is specified, it is not possible to access the remote UI of the device where
the MEAP authentication application is running. (Port 8080 is reserved to allow the PS
Print Server Unit to redirect to the iR device.)
5) Restart the device if the port number is set.
F-2-187
T-2-81
F-2-188