4
4
4-120
4-120
Parts Replacement and Cleaning > Image Formation System > Removing the Primary Transfer Roller (C,M,Y) > Procedure
Parts Replacement and Cleaning > Image Formation System > Removing the Primary Transfer Roller (C,M,Y) > Procedure
1) Pull out the pin, and make the Secondary Transfer Inner Roller Unit straight.
2) Install the pin removed in step 1 to the original position
3) Remove the ITB Unit from the ITB Cover and place it onto the paper.
• 2 claws
Paper
ITB unit
ITB cover
Claws
x2
4) Turn the ITB Sub Pressure Release Lever to make the Primary Transfer Roller (C,M,Y)
lifted.
ITB sub pressure release lever
Primary transfer roller(C)
Primary transfer roller(M)
Primary transferr oller(Y)
F-4-154
F-4-155
F-4-156
5) While holding down the Shaft Support (Front), remove the Engagement/Disengagement
Arm from the boss by tilting it.
Shaft Support
(Front)
Disengagement/
Engagement Arm
6) While holding down the Shaft Support (Front), remove the stopper from the boss.
Stopper
Boss
Shaft Support
(Front)
F-4-157
F-4-158