8
8
8-125
8-125
Service Mode > COPIER > ADJUST > MISC
Service Mode > COPIER > ADJUST > MISC
COPIER > ADJUST > MISC
ACS-CNT
Set jdgmt pixel count area in ACS:front
Lv.2 Details
To set the area where the pixel is counted to judge the color
presence in ACS mode.
As the value is larger, the judgment area is widened.
Use case
When adjusting the area where the pixel is counted to judge the
color presence in ACS mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-2 to 2
Default value
0
ACS-EN2
Set ACS mode jdgmt area in DADF mode
Lv.2 Details
To set the judgment area in ACS mode at DADF reading.
As the value is larger, the judgment area is widened.
Use case
When adjusting the judgment area in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-2 to 2
Default value
1
ACS-CNT2
Set ACS jdgmt pixel count area in DADF
Lv.2 Details
To set the area where the pixel is counted to judge the color
presence in ACS mode at DADF reading.
As the value is larger, the judgment area is widened.
Use case
When adjusting the area where the pixel is counted to judge the
color presence in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-2 to 2
Default value
0
REOS-PG
Set Reos processing coeffct at 1200dpi
Lv.2 Details
To set an optimal processing coefficient for 1200dpi print.
Print PG of the type 55 in COPIER> TEST> PG> TYPE, check the
images in the 4 areas of this PG, and specify the number of the area
in which the character proportion and line width become optimum in
the case of PDL1200 dpi setting.
After the setting is done, output the vertical and horizontal patterns
with 3 dots and 10 spaces, which are the same as the PG above,
in 1200 dpi, and confirm that the result is the same as the specified
area.
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 4
Default value
2
Related service mode
COPIER> TEST> PG> TYPE
COPIER > ADJUST > MISC
SEG-ADJ3
Set criteria for text/photo: back side
Lv.1 Details
To set the judgment level of text/photo original in Text/Photo/Map
mode (back side at duplex reading with 1 path).
As the value is larger, the original is more likely judged as a photo
document, and as the value is smaller, the original is more likely
judged as a text document.
Use case
When adjusting the classification level of text and photo in Text/
Photo/Map mode (back side at duplex reading with 1 path)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-4 to 4
Default value
0
K-ADJ3
Set Bk text jdgmt stdrd: back side
Lv.1 Details
To set the judgment level of black characters at text processing (back
side at duplex reading with 1 path).
As the value is increased, the text tends to be detected as black.
Use case
When preferring the text to be judged as black (back side at duplex
reading with 1 path)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-3 to 3
Default value
0
ACS-ADJ3
Set criteria for B&W/color in ACS:back
Lv.1 Details
To set the judgment level of B&W/color original in ACS mode (back
side at duplex reading with 1 path).
As the value is increased, the original tends to be detected as a
B&W document, and as the value is decreased, the original tends to
be detected as a color document.
Use case
When adjusting the color recognition level in ACS mode (back side
at duplex reading with 1 path)
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-3 to 3
Default value
0