manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 266 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 266

2

2

2-228

2-228

Technology > Updater > Preparation > Network Settings

Technology > Updater > Preparation > Network Settings

3. Press [Software Management Settings] button.

4. Press [Settings] button.

F-2-409

F-2-410

5. 

Ensure to enter “https://device.c-cdsknn.net/cds_soap/updaterif” in the field beside 

the [Delivery Server URL] button. 

If the URL is not entered or a wrong URL is entered in the field, click [Delivery Server URL] 
button to show the virtual keypad. Check the URL and enter the correct one.

Delivery Server CDS

Delivery Server Local CDS

F-2-411

F-2-412

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments