manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 786 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 786

7

7

7-95

7-95

Error•Jam•Alarm > Error Code > Error Code Details

Error•Jam•Alarm > Error Code > Error Code Details

E 

code

Detailed 

code

Occurance 

area

Items

Description

E753 0001

00

Title

Download Error

Description System Software Update Error 

Error occurs when updating system software of 

uninstalled options

Remedy

1. Check the log to find where the download error has 

been occurred. 

FIN_XX    Staple Finisher-XX/Booklet Finisher-XX 

IFN_XX    Inner Finisher-XX 

G3CCB    Super G3 FAX Board 

G3CCM   Super G3 FAX Board 

When any of the above system software is displayed, 

check if the target option has been installed. 

When the target option has not been installed: 

Turn OFF and then ON the main power supply to restore 

(since there is no system software to be updated.). 

When the target option has been installed: 

Check if the accessory is correctly installed and if the 

target system software to be downloaded is for the 

installed option. Then download the appropriate system 

software again.

E760 0001

00

Title

Main Controller PCB 2 internal error

Description Main Controller PCB 2 internal error
Remedy

1. Turn OFF and then ON the power. 

2. Remove and then reinstall the Main Controller PCB 2. 

3. Disconnect and then connect the connector connected 

to the Main Controller PCB 2. 

4. Replace the Main Controller PCB 2.

E804 0000

00

Title

Error in Power Supply Fan

Description Lock of the Power Supply Fan was detected
Remedy

1. Check power distribution to the Fan. 

2. Replace the Fan.

E805 0000

05

Title

Error in Fixing Heat Exhaust Fan 2

Description 1. After the power of the Host Machine has been turned 

ON, rotation of the Fixing Heat Exhaust Fan 2 (FM2) was 

detected before turning ON the fan. 

2. There is no rotation signal while the Fixing Heat 

Exhaust Fan 2 (FM2) is rotating.

Remedy

1. Check the Fixing Heat Exhaust Fan 2 (FM2) harness (to 

see if the harness is caught, disconnected or physically 

removed). 

2. Check the fuse of the Pickup Feed Driver PCB (UN2). 

3. Replace the Pickup Feed Driver PCB (UN2). 

4. Replace the Fixing Heat Exhaust Fan 2 (FM2).

E 

code

Detailed 

code

Occurance 

area

Items

Description

E805 0001

05

Title

Error in Fixing Heat Exhaust Fan 1

Description 1. After the power of the Host Machine has been turned 

ON, rotation of the Fixing Heat Exhaust Fan 1 (FM1) was 

detected before turning ON the fan. 

2. There is no rotation signal while the Fixing Heat 

Exhaust Fan 1 (FM1) is rotating.

Remedy

1. Check the Fixing Heat Exhaust Fan 1 (FM1) harness (to 

see if the harness is caught, disconnected or physically 

removed). 

2.  Replace the Feed Driver PCB. 

3. Replace the Fixing Heat Exhaust Fan 1 (FM1).

E806 0000

05

Title

Error in Delivery fan 1 

Description 1. Failure in the Connect signal when the fan was turned 

OFF. 

2. Failure detected while the fan is rotating.

Remedy

1. Check the fan harness (to see if the harness is caught, 

disconnected or physically removed). 

2. Replace the Pickup Feed Driver PCB (UN2). 

3. Replace the Delivery Fan (FM7).

E806 0001

05

Title

Error in Delivery fan 2

Description 1. After the power of the Host Machine has been turned 

ON, rotation of the fan was detected before turning ON 

the fan. 

2. There is no rotation signal while the fan is rotating.

Remedy

1. Check the fan harness (to see if the harness is caught, 

disconnected or physically removed). 

2. Replace the Pickup Feed Driver PCB (UN2). 

3. Replace the Delivery Fan 2 (FM9).

E806 0002

05

Title

Error in Secondary Transfer Exhaust Fan 

Description 1. After the power of the Host Machine has been turned 

ON, rotation of the fan was detected before turning ON 

the fan. 

2. There is no rotation signal while the fan is rotating.

Remedy

1. Check the fan harness (to see if the harness is caught, 

disconnected or physically removed). 

2. Replace the Pickup Feed Driver PCB (UN2). 

3. Replace the Secondary Transfer Exhaust Fan (FM8).

E807 0000

05

Title

Error in Process cartridge fan (rear)

Description 1. After the power of the Host Machine has been turned 

ON, rotation of the fan was detected before turning ON 

the fan. 

2. There is no rotation signal while the fan is rotating.

Remedy

1. Check the fan harness (to see if the harness is caught, 

disconnected or physically removed). 

2. Replace the Relay Board. 

3. Replace the fan.

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments