8
8
8-224
8-224
Service Mode > COPIER > TEST > NET-CAP
Service Mode > COPIER > TEST > NET-CAP
■
NET-CAP
COPIER > TEST > NET-CAP
CAPOFFON
ON/OFF of NetCap function
Lv.2 Details
To set ON/OFF of network packet capture function.
Use case
When switching ON/OFF of network packet capture function
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0:OFF 1:ON
Default value
0
STT-STP
Start and stop of network packet capture
Lv.2 Details
To start and stop network packet capture.
Use case
When starting and stopping network packet capture
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0:STOP 1:START
Default value
0
CAPSTATE
Status of NetCap function
Lv.2 Details
To display the status of network packet capture function
Use case
When displaying the status of network packet capture function
Adj/set/operate method None
Display/adj/set range
None
PONSTART
Start of NetCap function at power-on
Lv.2 Details
To set whether to enable network packet capture function from
power-on.
Use case
When switching whether to enable network packet capture function
from power-on
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
Default value
0
OVERWRIT
Data overwriting control: NetCap function
Lv.2 Details
To set whether to finish capturing or continue overwriting when HDD
becomes full.
Use case
When setting whether to finish capturing or continue overwriting
when HDD becomes full
Adj/set/operate method Enter the setting value, and then press OK key.
Default value
1
PAYLOAD
Payload discard: NetCap function
Lv.2 Details
To set whether to discard payload of captured packet.
Use case
When setting whether to discard payload of captured packet
Adj/set/operate method Enter the setting value, and then press OK key.
Default value
0
FILE-CLR
Deletion of file: NetCap function
Lv.2 Details
To delete data collected by network packet capture function.
Use case
When deleting data collected by network packet capture function
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
None
COPIER > TEST > NET-CAP
SIMPFILT
Settings of packet data filtering
Lv.2 Details
To set whether to perform filtering when capturing packet data.
When 0 is set, filtering is not performed (All the data are captured.)
When 1 is set, packet data is captured only when the receiver’s or
sender’s address coincides with the Mac address of this machine.
Use case
At problem analysis (at packet data analysis)
Display/adj/set range
0 to 2
0: Not filtered,
1: Filtered
2: Not used
ENCDATA
Setting of packet data encryption
Lv.2 Details
To set whether to encrypt the packet data when writing the captured
packet data to the USB memory.
Use case
- At problem analysis (at packet data analysis)
- When improving security of written packet data
Caution
This setting is enabled only when writing data to the USB memory.
Even when the packet data is loaded using SST, the file is specified,
therefore the setting is disabled.
Display/adj/set range
0 to 2
0: Encrypted (encrypted file)
1: Not encrypted (plain text file)
2: Encrypted (encrypted file + plain text file)
Default value
0
T-8-72