manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 229 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 229

2

2

2-191

2-191

Technology > MEAP > Formatting and Replacing the HDD > Using USB Devices

Technology > MEAP > Formatting and Replacing the HDD > Using USB Devices

Example of output result

********************************

*** USB Device report print ***

********************************

USB device information

T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 5 Spd=480 MxCh= 0

D: Ver=2.00 Cls=00(>ifc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=066f ProdID=4210 Rev=10.02

S: Manifacturer=SigmaTel, Inc.

S: Product=STIr42xx

S: SerialNumber=0002F0F7261287A5

C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=fe(app.) Sub=02 Prot=00 Driver=irda-usb

E: Ad=81(I) Atr=02(Bulk) MxPS=512 Ivl=0ms

E: Ad=01(O) Atr=02(Bulk) MxPS=512 Ivl=0ms

USB device information Content

Display the information of the USB device, which the device recognized.
If not displayed, there may be some fault occurred.
Some of standard optional devices are not displayed on a report.
The details of each item are as follows.

T : Topology

Internal hierarchical structure, which a USB device is connected, is shown. The number of 
a connected bus, the hierarchical structure and connection speed can be indicated.

D : Device

Information of USB devices is shown.

P : Product

Product information of USB devices is shown. Vendor ID and Product ID can be recognized 
here.

S : String

The character string embedded in a USB device is shown. A manufacture name and a 
product name can be recognized here.

F-2-348

C : Configure

The configuration information of a USB device is shown. * mark is to know whether it is 
active.

I : Interface

The interface information of a USB device is shown. Interface class and the driver to handle 
can be recognized.

The value and the content of Driver are as follows.

Labeling

Content

usbhid

It is displayed when the USB system driver is assigned to the input device 

connected.

usb-storage

It is displayed when storage devices (USB memory storage etc.) are 

connected.

irda-usb IrDA It is displayed when the dongle is connected.
hub

It is displayed when HUB is connected.

gpusb

It is displayed when the USB driver only for MEAP application is assigned 

to the input device connected.

gpusbex

It is displayed when a USB device, which specific vendor ID/ Product ID are 

preferentially registered using a manifest and MEAP API, is connected and 

the USB driver only for MEAP application is assigned.

E:Endpoint

The Endpoint information of a USB device is shown.

Right or wrong of report output

Connecting device

User installation

Report printing

HID

Available

Yes

Storage

Available

Yes

FAX

Not available

No

USB Device Port

IrDA

Not available

Yes

Multimedia Card Reader

Not available

Yes

IC Card Reader

Not available

Yes

Image Data Analyzer Board-A1

Not available

No

Hub

Internal Hub*

Not available

No

External Hub

Available

Yes

* USB Device Port-B1 Hub for device ports installed at the introduction

T-2-95

T-2-96

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments