manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 1097 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 1097

9

9

9-27

9-27

Installation > Installation Procedure > Checking after the Installation

Installation > Installation Procedure > Checking after the Installation

7) Set the Size Plate in accordance with the size being set. (Lump the Size Plates not in use 

together and store them at the rear.)

8) Close the cover from which the Size Plate is pushed in, and install the cassette.
9) Set the other cassette in the same way. 
10) If the cassette pedestal is installed, do the same for the cassette of the cassette pedestal 

as well.

NOTE:

Paper size settings are automatically recognized.

F-9-57

Checking after the Installation

1) In Service Mode, check the result of Drum Unit initialization.

Make sure that the value of the installed color is [0 to 2 ].

•  Service Mode (Level 1) > COPIER > DISPLAY > HV-STS > THCK-Y
•  Service Mode (Level 1) > COPIER > DISPLAY > HV-STS > THCK-M
•  Service Mode (Level 1) > COPIER > DISPLAY > HV-STS > THCK-C

NOTE:

If an error code [E061-xxxx] is displayed on the screen or the value is not appropriate,

1. Turn OFF the power, refit the Drum Unit and turn On the power again.

2. If the above work does not solve the problem, execute initialization of the Drum Unit 

for each color in Service Mode.

•  Service Mode (Level 1) > COPIER > FUNCTION > DPC > DRMRSETY

•  Service Mode (Level 1) > COPIER > FUNCTION > DPC > DRMRSETM

•  Service Mode (Level 1) > COPIER > FUNCTION > DPC > DRMRSETC

2) Check the result of initialization of developing toner ratio in Service Mode.

Check that each value is within the range of 32 to 68, and then write down the value on the 
service label at the rear side of the Front Cover.

•  Service Mode (Level 1) > COPIER > ADJUST > DENS > CONT-Y
•  Service Mode (Level 1) > COPIER > ADJUST > DENS > CONT-M
•  Service Mode (Level 1) > COPIER > ADJYST > DENS > CONT-C
•  Service Mode (Level 1) > COPIER > ADJYST > DENS > CONT-K

3) Check the Developing Patch initialization.

Check that each value is within the range of 340 to 640, and then write down the value on 
the service label at the rear side of the Front Cover.

•  Service Mode (Level 1) > COPIER > ADJUST > DENS > SGNL-Y
•  Service Mode (Level 1) > COPIER > ADJUST > DENS > SGNL-M
•  Service Mode (Level 1) > COPIER > ADJUST > DENS > SGNL-C
•  Service Mode (Level 1) > COPIER > ADJUST > DENS > SGNL-K

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments