7
7
7-42
7-42
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
E
code
Detailed
code
Occurance
area
Items
Description
E505 0002
05
Title
EEPROM error
Description The checksum for the punch controller EEPROM data
has an error.
Remedy
1. Failure of Punch Controller PCB.
E509 0001
05
Title
The combination error of the host machine and finisher
Description The unconformed finisher is equipped with the host
machine.
Remedy
1. The miss-combination of the host machine and finisher
2. The finisher controller PCB is fault.
3. The host machine controller PCB is faulty.
E514 8001
05
Title
Rear end assist home position error
Description The stapler does not leave the rear end assist home
position when the rear end assist motor has been driven
for 3 seconds.
Remedy
1. The rear end assist home position sensor (PI109) is
faulty.
2. The wiring between the finisher controller PCB and
rear end assist motor is faulty.
3. The end assist mechanism is faulty.
4. The rear end assist motor (M109) is faulty.
5. The finisher controller PCB is faulty.
E514 8002
05
Title
Rear end assist home position error
Description The stapler does not return to the rear end assist home
position when the rear end assist motor has been driven
for 3 seconds.
Remedy
1. The rear end assist home position sensor (PI109) is
faulty.
2. The wiring between the finisher controller PCB and
rear end assist motor is faulty.
3. The end assist mechanism is faulty.
4. The rear end assist motor (M109) is faulty.
5. The finisher controller PCB is faulty.
E519 0002
05
Title
Gear change home position error
Description The gear change home position sensor does not turn ON
when the gear change motor has been driven for 387
pulses.
Remedy
1. The gear change home position sensor (PI117) is
faulty.
2. The wiring between the finisher controller PCB and
gear change motor is faulty.
3. The gear change mechanism is faulty.
4. The gear change motor (M110) is faulty.
5. The finisher controller PCB is faulty.
E
code
Detailed
code
Occurance
area
Items
Description
E519 8001
05
Title
Gear change home position error
Description The gear change home position sensor does not turn
OFF when the gear change motor has been driven for
387 pulses.
Remedy
1. The gear change home position sensor (PI117) is
faulty.
2. The wiring between the finisher controller PCB and
gear change motor is faulty.
3. The gear change mechanism is faulty.
4. The gear change motor (M110) is faulty.
5. The finisher controller PCB is faulty.
E520 0001
05
Title
Shift Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot move from HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy
1. Check if the Motor (M4) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Shift Roller HP Sensor (S2) Connector is
physically removed.
4. Check if the Shift Roller HP Sensor (S2) failure occurs.
E520 0002
05
Title
Shift Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot return to HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy
1. Check if the Motor (M4) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Shift Roller HP Sensor (S2) Connector is
physically removed.
4. Check if the Shift Roller HP Sensor (S2) failure occurs.
E530 8001
05
Title
Front aligning plate home position error
Description The aligning plate does not leave the aligningplate front
home position sensor when thealignment plate front
motor has been driven for 4 seconds.
Remedy
1. The front aligning plate home position sensor (PI106)
is faulty.
2. The wiring between the finisher controller PCB and
front aligning plate motor is faulty.
3. The front aligning plate is faulty.
4. The front aligning plate motor (M103) is faulty.
5. The finisher controller PCB is faulty.