Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 723 / 1443

7
7
7-32
7-32
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
E
code
Detailed
code
Occurance
area
Items Description
E102 0101 05 Title Faulty EEPROM of YM-side Scanner
Description In the case of an error in reading EEPROM in the Laser
Driver (YM) or in the case of a wrong Laser Scanner Unit
which does not match with the Host Machine.
Remedy 1. Turn OFF and then ON the power.
2. Check the connector of the Laser Scanner Unit 1.
3. Replace the Laser Scanner Unit 1.
E102 0301 05 Title Faulty EEPROM of CBk-side Scanner
Description In the case of an error in reading EEPROM in the Laser
Driver (CBk) or in the case of a wrong Laser Scanner Unit
which does not match with the Host Machine.
Remedy 1. Turn OFF and then ON the power.
2. Check the connector of the Laser Scanner Unit 2.
3. Replace the Laser Scanner Unit 2.
E103 0001 05 Title With the Laser Scanners at YM side and CBk side, the
laser driver IDs were different
Description The model IDs were different between the YM side and
CBk side when reading the model ID from EEPROM.
(Detection is performed only with iR-ADV C5255, and
C5250.)
Remedy Check the parts number of the Laser Scanner Unit.
Replace the Laser Scanner Unit to make the following
combinations.
YM side: For iR-ADV C5255 and C5250, CBk side: For
iR-ADV C5255 and C5250 (recommended)
YM side: For iR-ADV C5051 and C5045, CBk side: For
iR-ADV C5051 and C5045 (operates normally but not
recommended)
E112 0000 05 Title Error in Dustproof Shutter
Description Failed to be at HP when it’s open (when the Job is
started).
Remedy 1. Check installation of the Dustproof Shutter Drive.
2. Check if the connector of the Laser Shutter Sensor
(PS29) or the Laser Shutter Motor (M28) is removed
(disconnected).
3. Check the status of Sensor Flag.
4. Replace the HP Sensor, Replace the Laser Shutter
Motor (M28).
E
code
Detailed
code
Occurance
area
Items Description
E112 0001 05 Title Error in Dustproof Shutter
Description Failure to be back to the HP although the specified period
of time has passed when closing.
Remedy 1. Check installation of the Dustproof Shutter Drive.
2. Check if the connector of the Laser Shutter Sensor
(PS29) or the Laser Shutter Motor (M28) is removed
(disconnected).
3. Check the status of Sensor Flag.
4. Replace the HP Sensor, Replace the Laser Shutter
Motor (M28).
E112 0002 05 Title Error in Dustproof Shutter
Description Failed to move from the HP when opening (the Job is
started)
Remedy 1. Check installation of the Dustproof Shutter Drive.
2. Check if the connector of the Laser Shutter Sensor
(PS29) or the Laser Shutter Motor (M28) is removed
(disconnected).
3. Check the status of Sensor Flag.
4. Replace the HP Sensor, Replace the Laser Shutter
Motor (M28).
E193 0001 05 Title Error in IMG2
Description Failure of LSI timing adjustment circuit on the DC
Controller PCB.
Remedy 1. Turn OFF and then ON the power.
2. Replace the DC Controller PCB (UN2).
E197 0000 05 Title Error in communication of HOB DMA mode
Description Communication failure between CPU and LSI on the DC
Controller.
Remedy 1. Turn OFF and then ON the power.
2. Replace the DC Controller PCB (UN1).
E197 0001 05 Title Error in communication of HOB single-shot mode
Description Communication failure between CPU and LSI on the DC
Controller PCB (UN1).
Remedy 1. Turn OFF and then ON the power.
2. Replace the DC Controller PCB (UN1).
E197 0002 05 Title Error in communication of HOB single-shot mode
Description Communication failure between CPU and LSI on the DC
Controller PCB (UN1).
Remedy 1. Turn OFF and then ON the power.
2. Replace the DC Controller PCB (UN1).
E197 0003 05 Title Timeout error in HOB single-shot mode
Description Communication failure between CPU and LSI on the DC
Controller PCB (UN1).
Remedy 1. Turn OFF and then ON the power.
2. Replace the DC Controller PCB (UN1).