8
8
8-140
8-140
Service Mode > COPIER > FUNCTION > CLEAR
Service Mode > COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > CLEAR
ADRS-BK
Clear of address book
Lv.1 Details
To clear the address book data.
Use case
When clearing the address book data
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
The address book data is cleared after the main power switch is turned
OFF/ON.
Display/adj/set range
None
CNT-MCON
Clear of Main Controller service counter
Lv.1 Details
To clear the service counter counted by the Main Controller PCB.
Use case
When clearing the service counter counted by the Main Controller PCB
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
None
Related service mode COPIER> COUNTER
CNT-DCON
Clear of DC Controller service counter
Lv.1 Details
To clear the service counter counted by the DC Controller PCB.
Use case
When clearing the service counter counted by the DC Controller PCB
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
During operation: ACTIVE, When operation finished normally: OK!
OPTION
Clear of service mode setting VL(OPTION)
Lv.1 Details
To return the value specified in service mode (OPTION) to the default
value (value at the time of RAM clear).
Adj/set/operate method Select the item, and then press OK key.
Caution
- Output the service mode setting values by P-PRINT before execution.
After execution, enter necessary setting value.
- This item is executed for the data on the Main Controller PCB, DC
Controller PCB and Reader Controller PCB.
Display/adj/set range
None
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
MMI
Clear Settings/Registration setting VL
Lv.1 Details
To clear the Settings/Registration setting values.
• Preferences (excluding values for Paper Type Management
Settings)
• Adjustment/Maintenance
• Function Settings
• Set Destination (excluding Address Lists)
• Management Settings (excluding Department ID Management)
Use case
When clearing various setting values of Settings/Registration
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
The setting value is cleared after the main power switch is turned OFF/
ON.
Display/adj/set range
None
COPIER > FUNCTION > CLEAR
MN-CON
RAM clear of MNCON PCB SRAM Board
Lv.1 Details
To clear the RAM data of the Main Controller PCB SRAM Board.
All data on the SRAM Board is initialized.
Use case
When clearing RAM data of the Main Controller PCB SRAM Board
Adj/set/operate method 1) Select the item, and then press OK key.
The machine is automatically rebooted.
2) Turn OFF/ON the main power switch.
Caution
- Forwarding Settings, Settings/Registration (Preferences), Adjustment/
Maintenance, Function Settings, Set Destination, Management
Settings, TPM Settings, etc. are deleted.
- Inform the user that all images in Inbox will be deleted and get
approval for it.
- Since the file management information is initialized, images on the
HDD cannot be read.
- Output the service mode setting values by P-PRINT before execution.
After execution, enter necessary setting value.
- The RAM data is cleared after the main power switch is turned OFF/
ON.
- If MN-CON is executed while a login application other than Default
Authentication is activated, any symptom occurs. (e.g. The login
screen is not displayed.) In this case, switch the login application to
Default Authentication once so that it returns to normal state.
Display/adj/set range
During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
CARD
Clear of card ID-related data
Lv.1 Details
To clear the data related to the card ID (department).
Use case
When clearing the data related to the card ID
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
The data is cleared after the main power switch is turned OFF/ON.
Display/adj/set range
During operation: ACTIVE, When operation finished normally: OK!