8
8
8-197
8-197
Service Mode > COPIER > OPTION > USER
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
TRAY-FLL
Set of target tray for tray full notice
Lv.2 Details
To set the tray which is the target of an output tray full notification.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: All trays to which paper can be output, 1: All trays which are specified
as the dedicated trays
Default value
0
PRNT-POS
ON/OFF of all pauses at error job cancel
Lv.2 Details
To set whether to pause the print operation of following jobs when a
job is canceled due to an error inside the machine (#037, etc.) except
service calls during PDL print.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value
0
AFN-PSWD
Access limit setting to user mode
Lv.2 Details
To set whether to enter a password when accessing to the user mode.
When 1 is set, password entry of system administrator is required after
pressing Settings/Registration key.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Password is not required, 1: Password is required
Default value
0
PTJAM-RC
Auto reprint setting at PDL print jam
Lv.2 Details
To set whether to automatically restart printing after clearing jam that
occurs with PDL print.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not automatically reprinted, 1: Automatically reprinted
Default value
1
COPIER > OPTION > USER
PDL-NCSW
Card mngm setting for PDL print job
Lv.2 Details
To set to make PDL print job be subject to card management by the
Card Reader.
With the setting to enable this mode, PDL print is available only when
the card ID of the card inserted to the Card Reader matches the
department ID.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the department
ID in the case that the card is inserted.
Default value
0
SLP-SLCT
Usage setting of network applications
Lv.2 Details
With the setting to use network-related application, the machine can be
recovered through network because it does not shift to sleep mode 1.
For this machine to recover from sleep mode 1 through network, a
particular packet needs to be received; however, the existing network-
related application does not send this packet. With the setting not to use
the network-related application, this machine cannot recover from sleep
mode 1 through network when it gets into sleep mode 1.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Do not use this at the normal service.
Display/adj/set range 0 to 1
0: Not used (Shift to sleep mode 1 is available.)
1: Used (Shift to sleep mode 1 is not available.)
Default value
0
PS-MODE
Compatible mode setting at PS usage
Lv.2 Details
To set for compatibility with existing machine regarding image process
or print specification with PS print.
Selecting 1 enables to have the print result equivalent to that of
iR2200/2800/3300 series while selecting 2 enables to have the print
result equivalent to that of iR105 series.
Use case
At replacement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: No use of compatibility mode with PS
1: Compatible in a conventional manner with PS Type3 halftone
command (Forming dither pattern: opposite order)
2 to 65535: Spare
Default value
0