8
8
8-245
8-245
Service Mode > SORTER > ADJUST
Service Mode > SORTER > ADJUST
SORTER > ADJUST
UP-CL
Setting of upward curl prev mode: Fin-C1
Lv.1 Details
Set 1 when upward curl occurs on the paper delivered to the Stack
Tray, and paper leaning due to the curl occurs.
Use case
When upward curl occurs on the paper delivered to the Stack Tray,
and paper leaning due to the curl occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
DW-CL
Setting downward curl prev mode: Fin-C1
Lv.1 Details
Set 1 when downward curl occurs on the paper delivered to the
Stack Tray, and paper leaning due to the curl occurs.
Use case
When downward curl occurs on the paper delivered to the Stack
Tray, and paper leaning due to the curl occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
THC-CL
Setting heavy ppr curl prev mode:Fin-C1
Lv.1 Details
Set 1 when upward curl occurs on the heavy paper delivered.
When 1 is set, the amount of Stack Tray descension for stack
delivery increases. The paper surface detection is performed for
every sheet, not for every 5 sheets.
Use case
When upward curl occurs on the heavy paper delivered
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
THC-PUSH
Setting heavy ppr out prev mode:Fin-C1
Lv.1 Details
Set 1 when the already stacked paper is pushed out at the time of
heavy paper delivery.
When 1 is set, the Stack Tray moves down temporarily before the
heavy paper is delivered to the Processing Tray if the leading sheet
is heavy paper.
Use case
When the already stacked paper is pushed out at the time of heavy
paper delivery
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
SORTER > ADJUST
OFST-STC
Set poor offset stack prev mode:Fin-C1
Lv.1 Details
Set 1 when paper is not appropriately stacked in the small size offset
mode.
When 1 is set, buffer operation is not performed in the small size
offset mode.
Use case
When paper is not appropriately stacked in the small size offset
mode
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
THN-STC
Set poor thin ppr stack prev mode:Fin-C1
Lv.1 Details
Set 1 when thin paper is not appropriately stacked.
When 1 is set, the stacking condition of thin paper improves.
Use case
When thin paper is not appropriately stacked
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
STP-P-CH
Set stpl stack displace prev mode:Fin-C1
Lv.1 Details
Set 1 when the paper on the top is misaligned in the staple delivery
mode.
When 1 is set, paper stack alignment operation is executed twice
immediately before stapling.
Use case
When the paper on the top is misaligned in the staple delivery mode
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
TRY-NIS
Set tray switch noise reduct mode:Fin-C1
Lv.1 Details
Set 1 when the operation noise after switching the Stack Tray is loud.
When 1 is set, the Stack Tray rise operation becomes slow.
Use case
When the operation noise after switching the Stack Tray is loud
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
TRY-SU
Set tray switching speedup mode: Fin-C1
Lv.1 Details
Set 1 when the Stack Tray switching time is long.
When 1 is set, the Stack Tray rise speed becomes fast.
Use case
When the Stack Tray switching time is long
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0