manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Service Manual, Page: 308 / 1443

Share
Download
Canon imageRUNNER ADVANCE C5255 Service Manual Download Page 308

2

2

2-270

2-270

Technology > DCM > DCM > Import/export by service mode (internal)

Technology > DCM > DCM > Import/export by service mode (internal)

5. Select PASSWD.

6. Enter the selection number displayed on the left side of the file to be selected.

F-2-482

F-2-483

7. When the correct file is displayed, press ->.

Note:

Specification of file selection display

•  " *" is displayed on the right side of the file to indicate that the file has been selected in 

SELECT. 

•  HDD : Up to 2 files are displayed in a screen.

8. Select PASSWD, enter a password from the software keyboard, and then press OK.

Click here

F-2-484

F-2-485

Summary of Contents for imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments