ASP STERRAD 100, Service Manual, Page: 67 / 309

PRINTER BUFFER FULL SEE OP MANUAL
APPENDIX A
There is no printed message for this condition.
Problem/Condition
F
The printer buffer has exceeded the maximum allowed size.
F
Cycle completed or canceled with no printout.
Action
Perform a Master Reset.
PROCESS COMPLETE
If the process was completed without an auto-restart, the printed
message contains all the process parameters. If an auto-restart was
performed, and the second cycle was successfully completed, you may
see “Auto-restart performed” and one or more of the following
informational messages:
4 4
Note: STERRAD 100 S Systems do not have an auto-restart
feature.
STERRAD 100 S Process Complete
Messages
F
Vacuum not low enough
F
Temperature has not risen.
F
Injection system interrupted.
F
Low pressure in injection
F
Power interrupted.
F
PM interval due L1.
F
PM interval due L2.
System Messages Using System Messages
3-28 STERRAD® 100 Sterilizer ASP Service Guide rev D