ASP STERRAD 100, Service Manual, Page: 203 / 309

Install Printer Ribbon and Paper
1. Install the printer ribbon.
2. Install a roll of paper in the printer. Place the rest of the paper in the
accessory box for shipment to the customer.
Replace the Panels
1. Replace the system panels.
2. Perform a complete system certification as detailed in the STERRAD
100 S Service Guide.
Perform BI Validation
1. Perform a complete BI validation and keep the records.
Final Procedures
1. Fill out and fax the Configuration Certification Statement attached to
these instructions.
2. If the unit is being shipped to another location, return it to the
shipping crate and make sure it is correctly packed and secured.
Certification Statement Instructions
Complete the certification statement included in the kit and fax it back
after the configuration has been done. The system serial number,
configuration kit number, LC number and country of origin MUST be
included on the form for proper certification.
1. Enter the complete system serial number.
2. Enter the configuration kit number.
3. Fill in your name, ASP service location, country, date and phone/fax
numbers.
4. Enter the LC number from the label.
5. Fax the entire certification back to the number provided on the
certification sheet.
International System Configurations System Installation
ASP Service Guide rev. D STERRAD® 100 Sterilizer 11-21