ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 264 / 300

PS220 Configuration & Operation Guide
263 PS220
Parameter
Listing
3.12 DDCS CONTROLLER REF 2
Reference 2 received from the external (DDCS) controller. The value has been scaled
according to parameter 60.60 DDCS controller ref1 type.
(-30000.00-30000.00)
1=10
3.13 M/F or D2D REF1
Master/follower reference 1 received from the master. The value has been scaled according
to parameter 60.10 M/F ref1 type. See also section Master/follower functionality. (-
30000.00- 30000.00)
1-10
3.14 M/F or D2D REF2
Master/follower reference 1 received from the master. The value has been scaled according
to parameter 60.10 M/F ref1 type. (-30000.00-30000.00)
1-10
3.30 FB A REFERENCE 1 INT32
(-2147483648-2147483647) Missing description
1=1
3.31 FB A REFERENCE 2 INT32
(-2147483648-2147483647)
1=1
3.51
IEC PANEL REFERENCE Panel reference defined in the application program. (-100000.00-100000.00)
1=10
3.200 MUTIPUMP SPEED REF
Speed reference sent to the Master drive from the Multipump program 0-10000 RPM
1=1
3.201 MULTIPUMP TORQUE REF
Torque reference sent to the drive from the Multipump program -300 -300%
1=1
3.202 FOLLOWER_SETPOINT
Reference sent to the Follower drive(s) from the Multipump program 0-10000 RPM
?
3.203 APPL_STATUS_BITS
(0-32767)
1=1
3.204 TORQ REF
Torque reference sent to the drive -300 -300%
1=1
3.205 SPEED REF
Speed reference sent to the drive -0 -10000 RPM
1=1
GROUP 4 WARNINGS & FAULTS
DESCRIPTION
Scaling
4.01 TRIPPING FAULT
Code of the 1st active fault (the fault that caused the current trip).
4.02 ACTIVE FAULT 2
Code of the 2nd active fault.
4.03 ACTIVE FAULT 3
Code of the 3rd active fault.
4.04 ACTIVE FAULT 4
Code of the 4th active fault.
4.05 ACTIVE FAULT 5
Code of the 5th active fault.
4.06 ACTIVE WARNING 1
Code of the 1st active warning.
4.07 ACTIVE WARNING 2
Code of the 2nd active warning.
4.08 ACTIVE WARNING 3
Code of the 3rd active warning.
4.09 ACTIVE WARNING 4
Code of the 4th active warning.
4.10 ACTIVE WARNING 5
Code of the 5th active warning.
4.11 LATEST FAULT
Code of the 1st stored (non-active) fault.
4.12 2ND LATEST FAULT
Code of the 2nd stored (non-active) fault.
4.13 3RD LATEST FAULT
Code of the 3rd stored (non-active) fault.
4.14 4TH LATEST FAULT
Code of the 4th stored (non-active) fault.
4.15 5TH LATEST FAULT
Code of the 5th stored (non-active) fault.
4.16 LATEST WARNING
Code of the 1st stored (non-active) warning.
4.17 2ND LATEST WARNING
Code of the 2nd stored (non-active) warning.
4.18 3RD LATEST WARNING
Code of the 3rd stored (non-active) warning.
4.19 4TH LATEST WARNING
Code of the 4th stored (non-active) warning.
4.20 5TH LATEST WARNING
Code of the 5th stored (non-active) warning.
4.21 FAULT WORD 1
ACS880-compatible fault word 1. The bit assignments of this word correspond to FAULT
WORD 1 in the ACS880. Parameter 04.120 Fault/Warning word compatibility determines
whether the bit assignments are according to the ACS880 Standard or ACS800 System
control program. Each bit can indicate several ACS880 events as listed below. This
parameter is read-only. Reference the ABB ACS880 Firmware Manual for bit definition.
—