ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 19 / 300

PS220 Configuration & Operation Guide
PS220 18
Basic
Startup
Assure that the system operating conditions are within the capabilities (e.g. speed, pressure, temperature,
power, etc.) of the driven equipment as rated by the manufacturer. Exceeding any of these limits could result in
failure of components resulting in serious physical injury and damage to equipment.
WARNING
3. Configure the Maximum Speed.
The Maximum Speed by default is configure to the motor nameplate speed. Since pumps develop pressure at the square
of the operating speed, and the Power consumed at the cube of the speed, caution should be taken to make sure that
the maximum speed is within all limits of the pumping system to prevent damage that may occur. Contact your autho-
rized Pump Sales Engineer to determine this speed if you are unsure.
A. “ARROW RIGHT” To change
B. “SAVE” to continue.
C. “Next”
4. Confirm the Operating Mode for Speed.
1. “ARROW UP/DOWN” Highlight Speed Control
2. “Select”