ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 244 / 300

PS220 Configuration & Operation Guide
243 PS220
Function & F
eatures
Keypad Use
Installation
Attach the control panel directly to the drive or use a separate mounting kit
(cabinet door mounting).
To attach the control panel:
1. Place its bottom end into the bottom of the slot in the drive (A),
2. Pivot the control panel and push the upper part (B) until you hear a click.
To detach the control panel:
1. Release the control panel by pressing the clip (B),
2. Pull the upper end of the control panel out of the slot in the drive.
Keypad Basics
1 Left Soft Key Usually used for exiting and canceling. Its function in a given
situation is shown by the Softkey selection in the bottom left corner
of the display. Holding down the key exits each view in turn until
you are back in the Home view.
2 Status LED
3 Stop Used to stop the drive in LOCAL mode. To use in REMOTE mode set
parameter 74.01 to KEYPAD
4 USB Connector The USB connector is used for connecting the control panel to a PC.
When connected, the control panel acts as an USB adapter for data
transfer between the PC tool and the drive.
5 Local / Remote The location key (Loc/Rem) is used to switch the control between
the control panel (Local) and remote connections (Remote). When
switching from Remote to Local while the drive is running, the drive
keeps running at the same speed. When switching from Local to
Remote, the status of the remote location is adopted.
6 Start Used to start the drive in LOCAL mode. To use in REMOTE mode set
parameter 74.01 to KEYPAD
7 Arrow Keys The up and down arrow keys are used to highlight selections in
menus and selection lists, to scroll up and down on text pages, and
to adjust values when, for example, setting the time, entering a
passcode or changing a parameter value. The left and right arrow
keys are used to move the cursor left and right in parameter editing
and to move forward and backward in assistants
8 Help The help key (?) opens a help page for certain drive functions and
faults.
9 Right Soft Key The right softkey is usually used for selecting, accepting and
confirming. The function of the right softkey in a given situation is
shown by the softkey selection in the bottom right corner of the
display.