ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 100 / 300

PS220 Configuration & Operation Guide
99 PS220
W
ater
Functions
2. Configure the Pipe Fill Time
The fill time is the time frame that the PS220 will run the Pipe Fill function. The default value is 50 Seconds.
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
3. Configure the Pipe Fill Speed
The fill speed is the RPM value that the PS220 will ramp up to and remain at while the function is executing.
The default value is 1000 RPM
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
4. Configure the Pipe Fill Stop Value
This value is used to end the Fill Function prior to the time in step 3. Applicable only when using Process
Control. There are no units displayed. The units are as configured with the Process Control Wizard.
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “Next”
5. Exit the Wizard
Select “NO”