ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 116 / 300

PS220 Configuration & Operation Guide
115 PS220
Miscellaneous
11.2 Torque Control (Smart Control)
Wizard
The PumpSmart PS220 has the functional capability to use the pumps torque
rather than the pump speed in its PID Process Control Functionality. This
allows for a significant improvement in the stable output of pump flow to
maintain the process systems requirement. This is called SmartControl. Please
refer to the SmartControl section in this manual for a detailed explanation of
this functionality. This Wizard will show the step-by-step instructions to con-
figure this functionality for use. To access this Wizard from the Home Screen
follow the path: Menu>PS220Configuration>Miscellaneous Setup>Torque
Control (SmartControl) >
The steps that you will perform:
1. Configure the Torque Reference to PID.
2. Configure the Torque Ramp up and Ramp down times
3. Turn on Torque Control.
4. Configure the Max Torque value to be used.
5. Exit the Wizard
The Screen Shots that follow will show you step by step as you progress, from
start to finish as you progress, how to configure this functionality.
1. Configure the Torque ref1 source to PID
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to change value to PID
3. “Save”
4. “ARROW DOWN”
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to PID
3. “Save”
4. “ARROW DOWN” 2 times