ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 10 / 300

PS220 Configuration & Operation Guide
9 PS220
Basic Startup
1. Basic Startup Wizard
The PumpSmart PS220’s default mode of operation utilizes the Electric
Motor connected and will run the Pump using the Basic Speed Control
Functionality. The Basic Startup will configure the PumpSmart PS220 with
the language you select, allow you to define the motor characteristic,
execute a Motor ID, and verify correct motor rotation. You will then select
the start/stop method, the operating speed range, and the method used
to send the speed set point reference for the system to work.
This procedure provides a baseline for all the PumpSmart functionality to
properly perform. It must be performed prior to any other functionality
can be configured.
This functionality can only be configured with the PumpSmart PS220
Configuration Wizard.
To access this Wizard, from the Home Screen follow the path:
Menu>PS220 Configuration>Basic Startup>
The steps that you will perform are as follows:
1. Configure the Motor Parameters.
2. Configure Basic Drive Setup information.
The Screen Shots that follow will show you step by step, from start to
finish as you progress, how to configure this functionality.