ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 76 / 300

PS220 Configuration & Operation Guide
75 PS220
Pump & VFD Protection
4.6 Protection Options Configuration
Wizard
Please refer to the Features & Functions section in this manual for a detailed
explanation of this functionality. This Wizard will show the step by step in-
structions to configure this functionality for use.
This functionality can be configured with the PumpSmart PS220 Configura-
tion Wizard. To access this Wizard from the Home Screen, follow the path:
Menu>PS220 Configuration>Pump & VFD Protection>Protection Options>
The Screen Shots that follow will show you step by step, from start to finish,
how to configure this functionality
The individual steps that will be performed are:
1. Configure the Protection Delay
2. Configure Speed Override Pump Protection
3. Configure the Pump Fault Reset
4. Configure the Pump Fault Reset Delay
5. Configure the Config Speed Min Setting
6. Configure the Stp Delay Min Spd
7. Exit Wizard
NOTE:
Choices 1-5 will apply to all of the Pump Protection Functions except where
noted. They will not be applicable to any VFD or Motor protection. The VFD
Protection Options are covered in the section “VFD Auto-Reset”.
1. Configure the Protection Delay:
The PumpSmart PS220 can be configured to delay the reaction time that The PS220 will wait
until activating the control of any of the protection features.
Notes:
1. The default is 0 which deactivates the function. The Maximum setting is 200 seconds, and
the Minimum is 1 second.
1. “ARROW RIGHT” To change
2. “ARROWS” to change
3. “Save”
4. “ARROW DOWN”