ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 27 / 300

PS220 Configuration & Operation Guide
PS220 26
SmartFlow 3. Configure the Fluids Specific Gravity’s Source
Please refer to Specific Gravity in this manual for more detailed explanation.
A. SG RATED (Fixed)
The default value for Specific Gravity [SG] is 1.0.
NOTES:
1. This value should only be changed now if you choose to bypass the “Smartflow Tune” function.
2. If the Specific Gravity varies by more than 5%, a correction method will be necessary.
1. “ARROW RIGHT” to change
2. “ARROWS UP/DOWN” to change value
3. “Save”
4. “Next”
B. Specific Gravity (Variable)
1. Fluid Temperature measured with Transmitter:
When changes to the SG are directly related to a change in the fluid’s temperature, the PumpSmart PS220 can
monitor these changes using a temperature transmitter. This transmitter will need to be connected and configured
to an available Analog Input. The corrected values then can be used with the internal Smartflow calculations.
NOTE: YOU WILL NEED TO CONFIGURE THE AVAILABLE ANALOG INPUT THAT WILL BE USED. THIS WIZARD DOES
NOT PROVIDE FOR THIS. COMPLETING THIS CAN BE ACCOMPLISHED BY GOING TO:
Menu>PS220 Configuration>I/O Configuration>Select the Analog Input #>