ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 148 / 300

PS220 Configuration & Operation Guide
147 PS220
Function & F
eatures
Fieldbus Control
Embedded Fieldbus Interface
The embedded fieldbus interface functionality is dedicated to the PS220’s Multipump functionality and cannot be used
for communication with an external control system. Modbus RTU communication is available by using the FSCA -01
fieldbus adapter.
There are many forms of Serial Communications Protocols that can be used with the PS220. Each of these are listed
below. Each of these will require an Adapter Module to be mounted and then configured for proper use. Please refer to
the ABB IOM manual that is supplied with each of these Modules for detailed information on their operation and use.
The Fieldbus Communications Protocols available with the PumpSmart PS220 are:
Control Net
Device Net
Ethernet/IP
Modbus RTU
Modbus TCP
Profibus DP
ProfiNet IO
The Information below can be used to further understand what is required to communicate with the PS220 using
Fieldbus Control.
Modbus
Register
Direction
In to the PS220
Pointer in drive Customer Setting
40001 -> Control Word - Fixed
PS220 Par 6.03
Control Word - Fixed
40002 -> FBA REF1 - Fixed
PS220 Par 40.16
FBA REF1 - Fixed
40003 -> FBA REF2 - Fixed
PS220 Par 40.17
FBA REF2 – Fixed
(NOT USED AT THIS POINT)
40004 -> OUT1 (53.01) User Defined
40005 -> OUT2 (53.02) User Defined
40006 -> OUT3 (53.03) User Defined
40007 -> OUT4 (53.04) User Defined
40008 -> OUT5 (53.05) User Defined
40009 -> OUT6 (53.06) User Defined
40010 -> OUT7 (53.07) User Defined
40011 -> OUT8 (53.08) User Defined
40012 -> OUT9 (53.09) User Defined
40013 -> OUT10 (53.10) User Defined
40014 -> OUT11 (53.11) User Defined
40015 -> OUT12 (53.12) User Defined