ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 99 / 300

PS220 Configuration & Operation Guide
PS220 98
W
ater
Functions
7.4 Pipe Fill Wizard
The PS220’s Pipe Fill function allows for the gradual filling of the discharge
piping system when the pumping system is initially started. This will dramati-
cally reduce the impact of any “water hammer” and prevent a “run- out” flow
condition as the system gradually fills. The pump will run to a pre-configured
speed and for a set duration.
When using the PS220’s Process Control Functionality, this function can be
configured to bypass the time allowed to run. The PS220 will monitor a pro-
cess control value, compare it to a preset value, and then end the Fill Function.
Process control will begin automatically at this time.
When the Fill Function is active the message “Pipe Fill Running” will be dis-
played on the Keypad and will be captured and stored in the event log.
When the Pipe Fill function is initiated, all PS220 functional control is disabled.
It is automatically enabled once the function completes.
Please refer to the Pipe Fill section in this manual for a more detailed explana-
tion of this functionality. This Wizard will show the step-by-step instructions
to configure this functionality for use. This functionality can be configured
with the PumpSmart PS220 Configuration Wizard. To access this Wizard, from
the Home View follow the path: Menu>PS220 Configuration>Water Func-
tions>Pipe Fill
The individual steps that will be performed are:
1. Configure enabling of the Pipe Fill function
2. Configure the Pipe Fill Time
3. Configure the Pipe Fill Speed
4. Configure the Pipe Fill Stop Value
5. Exit the Wizard
The Screen Shots that follow will show you step by step, how to configure this
functionality.
1. Configure enabling of the Pipe Fill function
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”