ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 108 / 300

PS220 Configuration & Operation Guide
107 PS220
I/O
Configuration
8.2. Digital Inputs Configuration Wizard
The PumpSmart PS220 comes standard with 6 Digital inputs. There are 2 additional that may be configured for use as
well. These inputs are sourced internally from the PS220 with 24V. This Wizard will guide you through configuring these
connections.
NOTES:
1. When configuring a particular function with the PumpSmart PS220 Configuration Wizards that will require the use of a
Digital Input, the Wizard in use will assist the configuration for proper use as you progress. There are times when you will
be reminded to manually configure a connection, or to validate a connection.
2. This Wizard should be used only after Basic Setup, Process Control, and Pump Protection is completed first.
3. This PS220 Configuration Wizard CANNOT be used to change or modify the methods of starting and stopping, or to
change or modify any of the Estop or Safe Torque Off functionality that is already in use on the PumpSmart PS220.
To access this Wizard, from the Home Screen follow the path: Menu>PS220 Configuration>I/O Configuration>No>
(OR Yes if you are configuring the FIO-11optional Extension Module for the first time)> Digital I/O > “Select”
The steps that you will perform:
1. Configure the Digital Input Number
2. Configure the Digital Input Function
3. Exit the Wizard
The Screen Shots that follow will show you step by step as you progress, from start to finish as you progress, how to
configure this functionality.
1. Configure the Digital Input by Number.
There are 6 digital inputs that can be selected.
NOTE: You may only select an input that shows a status of “NOT SELECTED” if already configured it will show “IN USE”
1. “ARROW UP/DOWN” to select DI*
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to select
3. “SAVE”
4. “ARROW UP/DOWN” (for further selections)