ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 232 / 300

PS220 Configuration & Operation Guide
231 PS220
Function & F
eatures
2. The settings for Parameters 37.11 through 15 should not have to be changed for a 1780 RPM
motor. They will need to be change for motors of lower or higher full load synchronous speeds
(1180 RPM and 3550 RPM). The recommendations are as follows:
37.11 = 8.5% of Full Load speed
37.12 = 42% of Full Load speed
37.13 = 72% of Full Load speed
37.14 = 84% of Full Load speed
37.15 = 100% of Full load speed
3. Parameters not mentioned do not apply to this function
4. Configure the time period before the drive will react when an underload condition exits. The
Default is 20 Seconds. The Ranges is 0-10,000 seconds.
Parameter
Description
Default in
RPM of the
Motor Recommendation
Notes
37.11
1st X Axis
Intersection
Point 150 S e e N o t e s
Should be
10% of Max
Motor Speed
37.12
2nd X Axis
Intersection
Point
750 S e e N o t e s
Should be
50% of Max
Motor Speed
37.13
3rd X Axis
Intersection
Point 1290 S e e N o t e s
Should be
72% of Max
Motor Speed
37.14
4th X Axis
Intersection
Point 1500 S e e N o t e s
Should be
83% of Max
Motor Speed
37.15
5th X Axis
Intersection
Point 1800 S e e N o t e s
Should be
100% of Max
Motor Speed