ITT PumpSmart PS220, Руководство по конфигурации и эксплуатации

Страница: 150 / 300

PS220 Configuration & Operation Guide
149 PS220
Function & F
eatures
Please refer to the ITT PS220 Fieldbus Configuration Guides.
PS220 Pump status “WORD 6.200” Bit Breakdown
Remote Bit 0
M/F Ready Bit 1
Running Bit 2
Fault Bit 3
M/F Switch request Bit 4
Setpoint Changed Bit 5
Drive Lock Bit 6
Sleep Bit 7
Start Issued Bit 8
Speed Override Bit 9
Switch to Follower Bit 10
Switch to Master Bit 11
Start Delay Bit 12
Multipump Alarm Bit 13
Water Enable Bit 14
Follower Switch over Bit 15
PS220 Alarm Word 1 “WORD 6.203” Bit Breakdown
Basic Pump Protect Warning Bit 0
Sleep Warning Bit 1
Dry Run Warning Bit 2
Min Flow Warning Bit 3
Runout Flow Warning Bit 4
Tuning Warning Bit 5
VFD Warning Bit 6
Cond1 Warning Bit 7
Cond1 Alarm/Fault
Bit 8
Cond2 Warning Bit 9
Cond2 Alarm/Fault Bit 10
Speed Override Bit 11
TX/AI Warning Bit 12
Secondary Protect A Warning Bit 13
Secondary Protect B Warning Bit 14
Not Used
Bit 15
PS220 Alarm Word 2 “WORD 6.204” Bit Breakdown
Basic Pump Protect Fault Bit 0
PID Low Demand Warning Bit 1
Dry Run Fault Bit 2
Min Flow Fault Bit 3
Pump Clogged Fault
Bit 4 (Only happens during pump
clean)
Tuning Fault
Bit 5 (SmartFlow Tune failure)
VFD Fault Bit 6
Multipump Comm Bit 7 (Comm Loss)
Not USED
Bit 8
Not USED Bit 9
Start Delay
Bit 10
Not USED Bits 11-15