HV580L Series Frequency Inverter
161
The count value needs to be collected by DI terminal. Allocate the corresponding DI terminal with function 25
(Counter input) in applications. If the pulse frequency is high, X5 must be used.
When the count value reaches the set count value (PB-08), the DO terminal allocated with function 8 (Set
count value reached) becomes ON. Then the counter stops counting.
When the counting value reaches the designated counting value (PB-09), the DO terminal allocated with
function 9 (Designated count value reached) becomes ON. Then the counter continues to count until the set
count value is reached.
PB-09 should be equal to or smaller than PB-08.
Figure 6-29 Reaching the set count value and designated count value
Group PC: Multi-Reference and Simple PLC Function
The HV580L multi-reference has many functions. Besides multi-speed, it can be used as the setting source of the
V/F separated voltage source and setting source of process PID. In addition, the multi-reference is relative value.
The simple PLC function is different from the HV580L user programmable function. Simple PLC can only
complete simple combination of multi-reference, while the user programmable function is more practical. For
details, see the descriptions of group.
PC-00
Multi-reference 0
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-01
Multi-reference 1
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-02
Multi-reference 2
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-03
Multi-reference 3
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-04
Multi-reference 4
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-05
Multi-reference 5
Default
0.0%
Setting range
-100.0%
～
100.0%
PC-06
Multi-reference 6
Default
0.0%
Setting range
-100.0%
～
100.0%
