Toshiba TOSVERT VF-AS3, Instruction Manual

Page: 170 / 622

E6582062 
5. [Fundamental operation] How to use parameters
5-4
4
5
9
For details of operation by external signals, refer to "Chapter 7".
4: Terminal AI4 (option)
The terminal [AI4] is included in the cassette option. Input a frequency command with an analog
signal.
For details of the optional terminal [AI4], refer to [10. 4. 1].
5: Terminal AI5 (option)
The terminal [AI5] is included in the cassette option. Input a frequency command with an analog signal.
For details of the optional terminal [AI5], refer to [10. 4. 1].
10: Touch wheel 1 (power off or press OK to save)
Use the touch wheel on the operation panel to input a frequency command.
Even if you turn off the power supply without pressing the [OK] key, a frequency command value will
be saved.
On the extension panel, use the up and down arrow keys to input a frequency command.
Even if you turn off the power supply without pressing the [ENT] key, a frequency command value
will be saved.
For how to set this value, refer to [4. 3. 1] and [4. 4. 1].
11: Touch wheel 2 (press OK to save)
Use the touch wheel on the operation panel to input a frequency command.
Press the [OK] key, and a frequency command value will be saved.
On the extension panel, use the up and down arrow keys to input a frequency command.
Press the [ENT] key, a frequency command value will be saved.
For how to set this value, refer to [4. 3. 1] and [4. 4. 1].
12: Sr0
Set the value of the parameter <Sr0: Preset speed 0> as a setting value of a frequency command.
For details of <Sr0: Preset speed 0>, refer to [5. 3. 7].
15: Terminal Up/Down frequency
Input a frequency command with an Up/Down command to the input terminal.
For details of how to set parameters and terminals, refer to [6. 6. 5].
16: Pulse train
Input a frequency command with a pulse train signal (up to 30 kpps) to the terminals [S4] and [S5].
For how to set this value, refer to [6. 6. 4].
17: High resolution pulse train (option)
Input a frequency command with a high resolution pulse train signal to the input terminal.
For how to set this value, refer to "Digital Encoder Instruction Manual" (E6582148).
20: Embedded Ethernet
Connect a communication cable to the Ethernet connector 1 or 2, and input a frequency command
through the Ethernet communication.
For details, refer to "Ethernet Function Instruction Manual" (E6582125).