Toshiba TOSVERT VF-AS3, Instruction Manual

Page: 63 / 622

E6582062 
2-29
2. Installation and wiring
2
3
9
10
4 Pass the motor wiring through the cable clamp.
The cable clamp exists only in frame size A1 to A5.
5 Mount the motor wiring to the screw of each corresponding terminal.
Mount ferrules with insulation sleeve terminal and crimp-style terminal with insulation sleeve to
the end of each wire of the motor in advance. For cautions, refer to "
■ Wiring" of [2. 3. 1].
6 Tighten the screws of the terminals [U/T1], [V/T2], and [W/T3] and a terminal [PE].
For the recommended tightening torque, refer to "
■ Recommended tightening torque of power
terminal screws" of [2. 3. 3].
Pass the cable
Cable
Tighten screws (x4)