Toshiba TOSVERT VF-AS3, Instruction Manual

Page: 64 / 622

E6582062 
2. Installation and wiring
2-30
2
9
7 Tighten two screws of the cable clamp and fix the motor wiring (four wires) with the cable
clamp.
The cable clamp exists only in frame size A1 to A5.
8 Similarly, mount the power supply wiring to the terminals [R/L1], [S/L2], and [T/L3] and a terminal
[PE] after passing it through other cable clamp.
For the recommended tightening torque of the screws, refer to "
■ Recommended tightening
torque of power terminal screws" of [2. 3. 3].
Also fix the power supply wiring with the cable clamp.
The cable clamp exists only in frame size A1 to A5.
9 When connection is complete, mount the front cover.
For how to mount, refer to [2. 2. 1].
Tighten the two screws of the clamp
to fix the cable
Cable Screws (x2)
Clamp